Error Codes

The following table lists all the error codes that are applicable to c-tree. These codes can appear:

•	as secondary code of 9D error in the COBOL program

•	in the c-tree client log file

•	as output of ctutil commands

.

Logical Error	Meaning
0	Operation completed successfully
2	Key value already exists
3	Could not delete because pointers don’t match
4	Could not find key to delete
5	Cannot call delete without verification with duplicate keys
6	Jump table error
7	Terminate user
8	Sysiocod value when FNOP_ERR caused by conflicting open requests (server)
9	Sysiocod value when FNOP_ERR, DCRAT_ERR or KCRAT_ERR caused by device access error
10	INTREE parameters require too much space
11	Bad INTREE parameters
12	Could not open file: not there or locked
13	Unknown file type
14	File corrupt at open
15	File has been compacted
16	Could not create index file
17	Could not create data file
18	Tried to create existing index file
19	Tried to create existing data file
20	Key length too large for node size
21	Record length too small
22	File number out of range
23	Illegal index member info
24	Could not close file
25	Bad link in deleted node list. REBUILD
26	File number not active
27	Drn before beginning of data records
28	Zero drn in ADDKEY
29	Zero drn in data file routine
30	Drn exceeds logical end of file
31	Flag not set on record in delete chain
32	Attempt to delete record twice in a row
33	Attempt to use NULL ptr in read/write
34	Predecessor repeat attempts exhausted
35	Seek error: check System IO Code value
36	Read error: check System IO Code error
37	Write error: check System IO Code error
38	Could not convert virtual open to actual
39	No more records available
40	Index node size too large
41	Could not unlock data record
42	Could not obtain data record lock
43	Version incompatibility
44	Data file serial number overflow
45	Key length exceeds MAXLEN parameter
46	File number already in use
47	c-tree has not been initialized
48	Operation incompatible with type of file
49	Could not save file
50	Could not lock node
51	Could not unlock node
52	Variable length keys disabled OR invalid key type
53	File mode inconsistent with c-tree config
54	Attempt to write a read only file
55	File deletion failed
56	File must be opened exclusive for delete
57	Proper lock is not held (CHECKLOCK/READ)
58	LOADKEY called with incorrect key number. You cannot continue
59	LOADKEY called with key out of order You may skip this key & continue
60	Percent out of range
61	NULL fcb detected during I/O
62	File must be opened exclusively
63	Start file/log file serial number error
64	Checkpoint past end of log file
65	Not enough memory during tran processing
66	Log file entry failed to find checkpoint
67	Could not rename file
68	Could not allocate memory for control list
69	Node does not belong to index
70	Transaction already pending
71	No active transaction
72	No space for shadow buffer
73	LOGFIL encountered during shadow only
74	Recovery: two active tran for user
75	Recovery: bad tran owner
76	Recovery: bad tran type
77	Recovery: file name too long
78	Transaction abandoned: too many log extents or dynamic dump wait exhausted
79	Could not log file opn/cre/cls/del
80	NULL target or bad keyno
81	Transaction allocation error
82	User allocation error
83	ISAM allocation error
84	Maximum users exceeded
85	Reduce lock to read lock after update
86	Deadlock detected
87	System not quiet: files in use
88	Linked list memory allocation error
89	Memory allocation during tran processing
90	Could not create queue
91	Queue write error
92	Queue memory error during write
93	Queue read error
94	Pending error: cannot save or commit tran
95	Could not start task
96	Start-file/log open error
97	Bad user handle
98	Bad transaction mode
99	Transaction type/filmod conflict
100	No current record for ISAM datno
101	Could not find ISAM keyno request
102	Could not open ISAM parameter file
103	Could not read first 5 parameters in ISAM parameter file
104	Too many files in ISAM parameter file
105	Could not undo ISAM update. Rebuild Files
106	Could not read data file record in ISAM parameter file
107	Too many keys for data file in ISAM parameter file
108	Incorrect keyno for index member in parameter file
109	Too many key segments defined in ISAM parameter file
110	Could not read segment record in ISAM parameter file
111	Could not read index file record in ISAM parameter file
112	LKISAM(ENABLE) found pending locks
113	No memory for user lock table
114	First byte of data record equals delete flag or bad variable length record mark
115	Key segments do not match key length
116	Bad mode parameter
117	Could not read index member record
118	NXTSET called before FRSSET for keyno
119	FRSSET called for index with wrong keytyp
120	Data record length exceeds rebuild max
121	Tried to update data with ctISAMKBUFhdr on
122	Attempt to change fixed vs. variable len
123	Var length header has bad record mark
124	Number of indices does not match (OPNIFIL)
125	c-tree already initialized
126	Bad directory path get
127	Could not send request
128	Could not receive answer
129	c-tree not initialized
130	Null file name pointer in OPNFIL
131	File name length exceeds msg size
132	No room for application message buffer
133	Server is not active
134	Could not get server’s message id
135	Could not allocate application id
136	Could not get application msg status
137	Could not set message appl msg size
138	Could not get rid of application msg
139	Badly formed file name
140	Variable record length too long
141	Required message size exceeds maximum
142	Application MAXLEN > server's MAXLEN
143	Communications handler not installed
144	Application could not id output queue
145	Could not find COMM software
146	Could not update free space info
147	Space to be reused is not marked deleted
148	WRTVREC cannot fit record at recbyt
149	Varlen less than minimum in ADDVREC
150	Server is shutting down
151	Could not shut down. Transactions pending
152	Could not extend logfile
153	Buffer too small
154	Zero length record in REDVREC
155	Native system failure
156	Timeout error
158	REDVREC record not marked active
159	Zero recbyt value
160	Multi-user interference: index information updated by the time user got to actual data record
161	User appears inactive
162	Server has gone away
163	No more room in server lock table
164	File number out of range
165	No file control block available
166	No more ct file control blocks in server
167	Could not read request
168	Could not send answer
169	Create file already opened (in recovery)
170	Bad function number
171	Application msg size exceeds server size
172	Could not allocate server msg buffer
173	Could not identify server
174	Could not get server message id
175	Server could not allocate user msg area
176	Could not get server msg status
177	Could not set message server msg size
178	Unexpected file# assigned to [si] in rcv
179	Server is at full user capacity
180	Could not read symbolic key name
181	Could not get mem for key symb name
182	No room for sort key. Increase MAXFIL.
183	Could not read file field number values
184	Attempt to reallocate set space
185	Not enough memory for addt'l sets-batches
186	Set number out of range
187	Null buffer in rtread.c
188	Null target buffer in rtread.c
189	Join_to skip
190	Join_to error
191	Join_to null fill
192	Detail_for skip
193	Detail_for error
194	Detail_for null fill
195	Could not get mem for dat symb name
196	Exceeded RETRY_LIMIT in RTREAD.C
197	Could not get memory for ifil block
198	Improper ifil block
199	Schema not defined for data file
400	Resource already enabled
401	Resources not enabled
402	File must be exclusive to enable res
403	Empty resource id
404	Output buffer too small
405	Resource id already added
406	Bad resource search mode
407	Attempt to get non-resource info
408	Resource not found
409	Not in use: available
410	User not active
411	Not a superfile
412	WRL to WXL commit promote pending(CIL)
413	Superfile host not opened
414	Cannot nest superfiles
415	Illegal ADDKEY to superfile
416	Illegal DELBLD to superfile
417	Cache page size error
418	Max name inconsistency
419	Host superfile does not support recovery
420	Key update with pending transaction
421	Filter not supported yet
422	Other functions not supported
423	Incomplete
424	Add list err
425	Batch in progress
426	No batch active
427	Status info already returned
428	No more info, batch cancelled
429	Bufsiz too small for record
430	Request is empty or inconsistent
431	Aggregate/serialization lock denied
432	Fixed length string requires len in DODA
433	Segment def inconsistent with schema
434	Very long def block not supported
435	File def memory error
436	Bad def number
437	Defptr NULL during GETDEFBLK
438	Requested def blk is empty
439	No conversion routine for Definition Block
440	Dynamic dump already in progress
441	No memory for dynamic dump file buffer
442	One or more files not available for dump
443	File length discrepancy
444	Could not create file during dump rcv
445	Not enough data to assemble key value
446	Bad key segment mode
447	Only the file's owner can perform op
448	Permission to set file definition denied
449	ADMIN has opened file. Cannot delete file
450	Invalid user id
451	Invalid password
452	Server could not process user/acct info
453	No such server
454	Service not supported
455	User does not belong to group
456	Group access denied
457	File password invalid
458	Write permission not granted
459	File delete permission denied
460	Resource not enabled
461	Bad permission flag
462	No directory found in superfile
463	File id uniqueness error
464	ISAM level logon not performed
465	Incremental Index: dnumidx < 1
466	Incremental Index: dfilno not an ISAM file
467	Incremental Index: aidxnam NULL for 1st
468	Incremental Index: active tran not allowed
469	Negative I/O request
470	Guest logons disabled
471	Error deleting sortwork file
472	Error creating unique name
473	Error opening first dummy file
474	Too few handles available min 3
475	Error closing dummy file
476	Error unlinking dummy file
477	Error getting first data area
478	Sinit phase not previously performed-srelease
479	Sreturn phase already started
480	No records in data buffers
481	Sint phase not previously performed-sreturn
482	Not enough memory
483	No valid record pointers in merge buffers
484	Error opening sortwork file
485	Error creating sortwork.00x file
486	No records fit in output buffer
487	Error reading sortwork file
488	Bytes in buf <> merge buf size
489	Error adjusting file pointer
490	Error closing sortwork.00x
491	Error closing sortwork file
492	Error deleting sortwork file
493	Error renaming sortwork.00x
494	Error closing output file
495	Error creating output file
496	Insufficient disk space
498	Old log file found during log create
499	Mismatch between recv log & file id
500	Server could not init SQL engine
501	Could not init SQL for a user SQL_REQUEST_ERR
502	Could not access SQL master info SQL_INVALID_CONTINUE
503	Could not continue SQL request
504	Server does not support SQL
505	User profile does not enable SQL
506	Could open save-restore file
507	Could not process save-restore file
508	Save restore inconsistency
509	Duplicate server
510	Active chkpnt at start of roll-forward
511	Index nodes form illegal loop: rebuild
512	Data file loop detected
513	FPUTFGET does not support CTSBLDX()
514	Queue has been closed
515	Cannot convert old IFIL structure
516	ctNOGLOBALS not allocated
517	'regid' is not registered
518	'regid' is already registered
519	Index logical EOF error
520	Attempt to update index with inconsistent tran#
521	Could not allocate memory for the streettalk login message buffer (Banyan environment)
522	Userid in INTISAM does not match current login id (Banyan environment)
530	Client does not match server (Banyan environment)
531	Index reorg entry error
532	TRANSAV called with AUTOSAVE on
533	File header high-water-mark overflow
534	Transaction # overflow
535	Ctree not registered. Call REGCTREE
537	Concurrent processes not allowed (c-tree stand-alone single user)
539	Sysiocod when file does not appear to contain any valid information.
540	Null parameter
541	Transaction log cannot be written
542	Could not create mirror file
543	Could not open mirror file
544	Could not close mirror file
545	Could not delete mirror file
546	Could not write to mirror file
547	Could not save mirror file
548	Could not read from mirror
549	Mismatch between mirror headers
550	Attempt to open primary w/o mirroring in a file mode of MIRROR_SKP permits a primary to be opened w/o error.
551	File already opened without mirror
555	Could not read primary, switching
556	Could not write primary, switching
557	Could not write mirror, suspend mir
558	Could not save primary, switching
559	Could not save mirror, suspend mir
560	Only one of each monitor at a time
561	SYSMON: dynamic dump begins
562	SYSMON: dynamic dump ends
563	SYSMON: dynamic dump ends (errors)
570	Incomplete compression
571	Index rebuild required
572	Incomplete compression & index rebuild required
573	Primary\mirror out-of-sync. Copy good file overbad.
574	Incomplete compression & primary/mirror out-of-sync
575	Index rebuild required & primary/mirror out-of-sync
576	Incomplete compression & index rebuild required & primary\mirror out-of-sync
590	Could not find ISAM context ID
591	Old context ID. Call CLSICON()
592	Context ID exists
595	Varlen too small in PUTCIDX
596	Missing information
597	Could not initialize expression
598	Could not evaluate conditional expression
600	No more client threads
601	ctVERIFY detected problems with idx
602	No memory for system lock table
610	CTHIST target==NULL
611	CTHIST could not access log
612	CTHIST must be called with ctHISTfirst
613	CTHIST can only access data or index
614	No valid ISAM map from index to data
615	Cannot get index info from data filno
616	CTHIST cannot be called during a tran
617	Did not find target
618	Log scan terminated: EOF or bad entry
619	CTHIST on data file: recbyt==0
620	Bufsiz too small
621	Transaction type not expected
622	Must reset CTHIST first
623	Not enough memory for CTHIST
624	Net change only applies to specific match of key or record position
625	Must specify exactly one matching criteria (user & node may be combined)
626	Encountered an UNDTRAN going forward: must completely restart this CTHIST sequence HUNK_ERR
627	Unknown type of request
628	Must specify filno
629	Could not initialize internal file ID
652	Unexpected duplicates found and listed in file logged in CTSTATUS.FCS
672	Inconsistency: file attr & sys version
4000	Base error number
4001	Not enough memory
4002	Handle is NULL
4003	No session handle
4004	Invalid argument
4005	Index out of range
4006	Argument is too small
4007	Null argument not valid
4008	Null argument not valid
4009	Table is not open
4010	Not a database handle
4011	Handle is active
4012	Handle is not active
4013	Handle is not a table
4014	Unknown field name
4015	Can't perform delete
4016	Field already exist
4017	Not a field handle
4018	Not an index handle
4019	Invalid field/key type
4020	Not a segment handle
4021	Table already exist
4022	Table already exist
4023	Table does not exist
4024	Not a record handle
4025	Internal error
4026	Invalid find mode
4027	No data in record
4028	Invalid date or time format
4029	Invalid date
4030	Invalid date day
4031	Invalid date month
4032	Invalid date year
4033	Invalid packed CTTIME
4034	Invalid hour
4035	Invalid minute
4036	Invalid second
4037	Invalid time AM or PM value
4038	Operation causes Overflow
4039	Operation cause underflow
4040	Division by zero error
4041	Invalid timestamp
4042	Can't perform type conversion
4043	Argument is too big
4044	Path does not exist
4045	Unknown index number
4046	Not found
4047	Invalid segment mode
4048	Table has no indices
4049	Invalid segment number
4050	Invalid ISAM context handle
4051	Index name already in use
4052	Partial field data read
4053	Invalid index name
4054	Feature not supported
4055	Invalid lock mode
4056	Record not locked
4057	Record is not locked for writes
4058	Dictionary handle not allocated
4059	Not yet implemented
4060	Invalid number
4061	Invalid number precision
4062	Invalid number scale
4063	Record buffer not large enough
4064	Recbyt index can't be deleted
4065	Rowid index can't be deleted
4066	Table has no rowid index
4067	Cannot create a file (dupdb)
4068	Cannot copy a file (dupdb)
4069	Can't restore lock
4070	Invalid isolation level
4071	Conditional expression evaluates to false
4072	Conditional expression parser error
4073	Invalid type mixup
4074	Unknown field name
4075	Internal yacc error
4076	Memory allocation failed
4077	Stack overflow
4078	Stack Underflow
4079	Invalid execution node
4080	Division by zero
4081	No record schema
4082	No record buffer
4083	Not enough data
4084	Invalid session type
4085	Invalid alter table action
4086	Records are different
4087	Invalid operator
4088	Table was open read only
4089	CALLBACK not implemented
4090	Invalid handle type
4091	Invalid callback type
4092	Can't move segment
4093	Index name duplicated in database
4094	Database does not exit or not found
4095	Index has no segments
4096	Batch operation not active
4097	Batch operation is already active
4098	Invalid batch mode
4099	Not a resource handle
4100	Invalid session attach mode
4101	Session not attached
4102	Invalid binary field length
4103	Router table error
4104	Invalid router table name
4105	Invalid number of fields in router
4106	Invalid router field mapping
4106	The database is not SQL
4107	The record buffer contains data
4108	Field offset calculation going after the record size
4109	User error code reserved to callback functions
4110	User error code reserved to callback functions
4111	User error code reserved to callback functions
4112	User error code reserved to callback functions
4113	User error code reserved to callback functions
4114	User error code reserved to callback functions
4115	User error code reserved to callback functions
4116	User error code reserved to callback functions
4117	User error code reserved to callback functions
4118	User error code reserved to callback functions
4119	User error code reserved to callback functions
4120	User error code reserved to callback functions
4121	User error code reserved to callback functions
4122	User error code reserved to callback functions
4123	User error code reserved to callback functions
4124	User error code reserved to callback functions
4125	User error code reserved to callback functions
4126	User error code reserved to callback functions
4127	User error code reserved to callback functions
4128	User error code reserved to callback functions
4129	Cannot properly check/update dictionary UID
4130	No more RESOURCE for vtable available on parent table
4131	The table has VTables defined in the dictionary
4132	The VTable type in the dictionary mismatches the one in the resource